61 lines
1.9 KiB
Plaintext
61 lines
1.9 KiB
Plaintext
|
/*****************************************************************************
|
|||
|
|
* | File : Readme_CN.txt
|
|||
|
|
* | Author : Waveshare team
|
|||
|
|
* | Function : Help with use
|
|||
|
|
* | Info :
|
|||
|
|
*----------------
|
|||
|
|
* | This version: V1.0
|
|||
|
|
* | Date : 2021-06-05
|
|||
|
|
* | Info : Here is an English version of the documentation for your quick use.
|
|||
|
|
******************************************************************************/
|
|||
|
|
This file is to help you use this Demo.
|
|||
|
|
A brief description of the use of this project is here:
|
|||
|
|
|
|||
|
|
1. Basic information:
|
|||
|
|
This routine was verified on Raspbe Pi 4B using the XXXinch e-paper HAT module.
|
|||
|
|
You can view the corresponding test routines in the \lib\Examples\ of the project.
|
|||
|
|
|
|||
|
|
2. Pin connection:
|
|||
|
|
Pin connections can be viewed in \lib\epdconfig.py and will be repeated here:
|
|||
|
|
EPD => Jetson Nano/RPI(BCM)
|
|||
|
|
VCC -> 3.3
|
|||
|
|
GND -> GND
|
|||
|
|
DIN -> 10(SPI0_MOSI)
|
|||
|
|
CLK -> 11(SPI0_SCK)
|
|||
|
|
CS -> 8(SPI0_CS0)
|
|||
|
|
DC -> 25
|
|||
|
|
ERST -> 17
|
|||
|
|
BUSY -> 24
|
|||
|
|
INT -> 27
|
|||
|
|
TRST -> 22
|
|||
|
|
SDA -> SDA1
|
|||
|
|
SCL -> SCL1
|
|||
|
|
|
|||
|
|
3.Installation library
|
|||
|
|
python2
|
|||
|
|
sudo apt-get update
|
|||
|
|
sudo apt-get install python-pip
|
|||
|
|
sudo apt-get install python-pil
|
|||
|
|
sudo apt-get install python-numpy
|
|||
|
|
sudo pip install RPi.GPIO
|
|||
|
|
sudo pip install spidev
|
|||
|
|
|
|||
|
|
python3
|
|||
|
|
sudo apt-get update
|
|||
|
|
sudo apt-get install python3-pip
|
|||
|
|
sudo apt-get install python3-pil
|
|||
|
|
sudo apt-get install python3-numpy
|
|||
|
|
sudo pip3 install RPi.GPIO
|
|||
|
|
sudo pip3 install spidev
|
|||
|
|
|
|||
|
|
4. Basic use:
|
|||
|
|
Since this project is a comprehensive project, you may need to read the following for use:
|
|||
|
|
You can view the test program in the examples\ directory.
|
|||
|
|
Please note which ink screen you purchased.
|
|||
|
|
Chestnut 1:
|
|||
|
|
If you purchased 2.9inch Touch e-Paper HAT, then you should execute the command:
|
|||
|
|
sudo python TP2in9_test.py
|
|||
|
|
or
|
|||
|
|
sudo python3 TP2in9_test.py
|
|||
|
|
|